Verified boiler fault code
Sime ALL 95 Fault Code (Brava Slim HE ErP)
Flame-signal micro-interruptions error.
Safety disclaimer
Fault code summary
- Manufacturer
- Sime
- Fault code
- ALL 95
- Fault type
- Flame detection, Ignition, PCB/electronics
- Severity
- high
- Reset
- The official table gives engineer checks; no repeated homeowner reset is advised.
- Applicable models
- Brava Slim HE ErP 25, Brava Slim HE ErP 30, Brava Slim HE ErP 35, Brava Slim HE ErP 40
Quick answer
Flame-signal micro-interruptions error.
What does this fault code mean?
Flame-signal micro-interruptions error.
Common causes
- Electrode issue
- Control-board issue
- Electrical power-supply issue
- Gas-calibration issue
Symptoms
- ALL 95 alarm displayed
What can the homeowner safely check?
- Check only that the appliance has power and record the alarm; do not access electrodes or electronics.
Boiler reset information
The official table gives engineer checks; no repeated homeowner reset is advised.
When should I call an engineer?
Contact a suitably qualified heating engineer when the fault persists, the boiler locks out, or the manufacturer instructions do not resolve it. For gas appliance work in the UK, use a Gas Safe registered engineer.
Engineer diagnosis
- A qualified engineer should check the electrode, board, electrical supply and gas calibration.
Applicable boiler models
Related fault codes
- ALL 01 — Brava Slim HE ErP
Flue-gas thermostat fault.
Read fault code - ALL 02 — Brava Slim HE ErP
Low water pressure in the appliance.
Read fault code - ALL 03 — Brava Slim HE ErP
High water pressure in the heating circuit.
Read fault code - ALL 44 — Brava Slim HE ErP
No-flame gas-valve opening-time sum anomaly.
Read fault code - ALL 56 — Brava Slim HE ErP
Lock for delivery/return temperature difference above the maximum limit.
Read fault code - ALL 57 — Brava Slim HE ErP
Lock for the flow-temperature check (open-vent model).
Read fault code - ALL 62 — Brava Slim HE ErP
Self-calibration procedure required.
Read fault code - ALL 72 — Brava Slim HE ErP
Incorrect positioning of the delivery sensor.
Read fault code
Manufacturer documentation
Brava Slim HE ErP installation, use and maintenance manual (official Sime document 6322841C)Official manual fault table: | ALL | 95 | Flame signal micro interruptions error | - Check electrode - Check board - Check electric power supply - Check gas calibration |
Last verified
2026-09-12
Frequently asked questions
What does Sime ALL 95 mean?
Flame-signal micro-interruptions error.
Can I reset a Sime ALL 95 fault?
The official table gives engineer checks; no repeated homeowner reset is advised.